Loop-Coil™ Ties allow you to make adjustable-length ties from off-the-shelf components. Use a single LC and re-useable gang waler rod for ties down to 4” length. Or, thread two LC's back-to-back onto a length of standard ½”coil rod for adjustable-length ties for 8” walls and up.

Since LC’s are manufactured in a tightly-controlled process, you are assured of an adjustable long tie that is as strong as a standard heavy-duty panel tie (2800 lbs SWL). Don’t take chances on field-welded ties or other make-do measures.

Form a blind side wall of any width by simply threading a Loop-Coil Tie and a Steel Dog® Rebar Hook onto a length of ½”coil rod. This fast way of connecting to the rebar studs used to back up Stay-Form® panels eliminates costly, labor-intensive, custom-made hook ties.

Loop-Coil™ Ties provide a convenient way to do one-sided forming. Secure lengths of ½”coil rod into drilled holes in existing wall with drop-in anchors, rock anchors, epoxy, or other means. Then screw on Loop-Coil™ Ties to proper wall thickness and attach to modular forming panels.

Other standard ½”coil rod hardware (Rebar Hooks, Coil-Lags™, toggle bolts, plate washers and nuts, etc.) can be used to secure to sheet piling, plywood, or other materials.